The RP1-2000 cable railing system is an all-round profile railing system.

• The posts are a 2" round profile and they are pre-drilled for cables.
• The top cap is also a 2" round profile and attaches to the vertical post mechanically so no welding is necessary.
• The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
• The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.
• Lighted rail options available.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.

The VC1-2000 cable railing system is our vertical cable railing system.

• The vertical post is a 2" × 2" rectangular profile.
• The horizontal upper and lower posts that the cable attaches to are a 1 1/2" × 1 1/2" square profile.
• The top cap is a 2" dia. round profile and attaches to the vertical post mechanically so no welding is necessary.
• The handrail if applicable is designed from a 1 1/2" stainless steel tube.
• The cable infill system consist of 1/8" dia. 1×19 cable 3" o.c. with a decorative dome head fitting at the upper and an adjustable fitting at the lower end for tensioning.
• Lighted rail options available.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

This is a welded stainless steel railing system with vertical stainless steel cable infills. The system is designed with options for either bolt in or core drilled cable railing applications.

The SP1-2000 cable railing system is our most popular and cost effective railing system.

• The posts are a 1 1/2" square profile and they are pre-drilled for cables.
• The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
• The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
• The cable system is a 3/16" dia. cable with adjusters at each end of the cable for tensioning.
• Lighted rail option available.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

The FB3-2000 cable railing system is a combination of flat bar and round profile railing system. This system is similar to our FB1-2000 except the cables are visible as they pass through the post.

• The posts consist of (2) 1/2" × 1 1/2" flat bars bridged together by (2) 1/2" × 1 1/2" gusset plates.
• The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
• The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
• The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.

The FB1-2000 cable railing system is a combination of flat bar and round profile railing system.

• The posts consist of (2) 1/2" × 1 1/2" flat bars bridged together by 1/2" diameter tubes that the cables pass through.
• The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
• The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
• The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.